Home | News & Events | Colorado to Launch CAERS Platform for Annual Air Emission Reporting in January 2027

Legal Alerts | November 19, 2026 12:00 am Colorado to Launch CAERS Platform for Annual Air Emission Reporting in January 2027

In January 2027, the Colorado Department of Public Health and Environment’s (CDPHE) Air Pollution Control Division (the Division) will open the Combined Air Emissions Reporting System (CAERS) for annual reporting of certain criteria pollutants, ozone precursors, and toxic air contaminants (TAC) emissions under Colorado Air Quality Control Commission (AQCC) Regulation No. 3, Part A, Section IX.  The first reports, covering calendar year 2026 emissions, are due June 30, 2027, and the Division has requested that expected reporters complete several registration steps by December 1 and December 15, 2026. A list of the expected CAERS reporters is available here: Expected Reporter List. Facilities should review the expected reporter list and conduct their own applicability analysis to confirm whether they must report using CAERS before the December registration dates.  Facilities with questions about their CAERS reporting obligations should review the Division’s CAERS Webpage or contact a member of the Davis Graham Environmental Group.

Background

The new reporting rules stem from the Public Protections from Toxic Air Contaminants Act (HB22-1244). To implement that statute, the AQCC adopted a new annual emissions reporting regulation in Regulation 3, Part A, Section IX, requiring certain facilities to submit annual emissions reports by June 30th each year “in a Division-approved format.” The AQCC also created an additional list of 118 TACs in Regulation 3, Part A, Appendix C with associated reporting thresholds that fall below the standard Air Pollutant Emission Notice (APEN) reporting threshold.

CAERS is a centralized EPA application that is already used by ten other air agencies across the country.  Beginning in January 2027, CAERS will serve as the “Division-approved” format for Section IX annual emissions reports. The Division hopes that CAERS will streamline reporting by consolidating criteria pollutant and TAC data in a single report and provide facilities with a head start on their Toxics Release Inventory (TRI) reporting under 40 C.F.R. Part 372.

Who Must Report in CAERS

Facilities in any of the following five categories must report annual criteria pollutant and TAC emissions through CAERS:

  • Title V major sources. Sources that have, or are required to obtain, a Title V operating permit, including sources that applied or should have applied for a Title V permit because their actual or potential emissions exceed major source thresholds.
  • Synthetic minor sources. Sources with permits containing enforceable conditions on emissions or operations that keep them below major source thresholds.
  • Minor sources with specific metal processes. Permitted, APEN-only, or APEN-exempt minor sources in NAICS codes 325, 331, 332, 333, 335, or 811 that conduct electroplating, plating, polishing, anodizing, coloring, thermal spraying, welding, plasma cutting, metal heat treating, or other metal fabrication (excluding fuel combustion), and whose facility-wide emissions reach at least 0.088 pounds per year of cadmium, 0.16 pounds per year of nickel, or 0.013 pounds per year of hexavalent chromium.
  • Minor sources emitting ethylene oxide. Sources with facility-wide ethylene oxide emissions of at least 0.032 pounds per year.
  • EPA TRI reporters. Sources that report to EPA’s TRI stack or fugitive air releases of any Appendix C TAC above the Appendix C reporting thresholds.

A facility that falls within one of these categories must report all non-exempt equipment and activities, along with unit specifications, release points, and control devices using CAERS. Facilities must also report every Appendix C TAC emitted at or above the applicable threshold, and criteria pollutants and precursors (CO, NOx, VOC, SO2, PM2.5, and PM10) at or above APEN thresholds, or at lower levels if VOC or PM emissions are used to estimate any TAC. Some APEN-exempt equipment remains subject to Section IX reporting, so sources should review the exemption list on the Division’s CAERS Webpage to confirm whether their APEN-exempt equipment must be included in their CAERS reports.  

Notably, a report is required even if the facility did not operate in 2026 or its emissions fell below all reporting thresholds; in those cases, the facility marks itself as temporarily or permanently shut down in CAERS and, for a permanent shutdown, completes the APEN cancellation process.

The Division has indicated that a facility’s CAERS account may be pre-populated with equipment and other data based on the facility’s prior reporting to the Division, but the pre-populated data must be carefully reviewed for errors or mislabeling.  Going forward, the equipment and data will remain in the facility’s CAERS account, which should decrease reporting time in subsequent reporting years.

Upstream and Midstream Oil and Gas Operations Continue to Report Through ONGAEIR

CAERS will not be used for oil and gas equipment and activities in the upstream and midstream oil and gas segments.  Equipment and activities subject to AQCC Regulation No. 7, Part B, Section V, which covers oil and gas operations and equipment at or upstream of a natural gas processing plant and Class II disposal well facilities, will continue to report annual emissions through the Oil and Natural Gas Annual Emission Inventory Reporting (ONGAEIR) platform.

Key Deadlines

The Division has published the following timeline and key deadlines for the first reporting year:

  • December 1, 2026 (recommended). Submit the Colorado CAERS User Registration Form to pre-register preparers and the certifier. If a facility meets the applicability criteria but does not appear on the Division’s expected reporters list, submit a Facility Creation Request Form, one per facility, so the facility can be loaded into CAERS by mid-January.
  • December 15, 2026 (recommended). Register in, or add the CAERS module to, EPA’s Central Data Exchange (CDX), and request preparer access to the facility. Certifier-only users should wait to complete this step.  The Division is working through some issues with certifier-only users and will advise when to request the certifier role.
  • Mid-January 2027. CAERS opens for 2026 reporting, with data pre-populated from Division records.
  • June 1, 2027 (recommended). Complete the 2026 report and resolve quality assurance checks.
  • June 30, 2027 (required). The certifier registered in CAERS must certify and submit the 2026 report to the Division.

Minor sources with specific metal processes or ethylene oxide emissions may qualify for a one-year extension for reporting using CAERS, with first reports due in 2028 rather than 2027. To qualify, the facility must not have reported greenhouse gas or APEN emissions to the Division, or reported to EPA’s TRI, since January 1, 2020.

Conclusion

Facilities should confirm whether they fall within a CAERS reporting category, check the expected reporters list, complete registration before the December deadlines, and begin compiling 2026 emissions data. Below is a list of helpful links provided by the Division:

Furthermore, the Division hosted an “Introduction to CAERS” training session on November 5, 2026, and is planning to host a “Welcome to CAERS” training session on January 13, 2027. A recording of the November training session with presentation slides is available on the Division’s CAERS Webpage, as is the registration link for the upcoming January 2027 training session.


For questions about this legal alert or CAERS reporting, please contact a member of the Davis Graham Environmental & Public Lands Group.

Related News & Events